If you’re planning to install a new vanity, you should start the flooring installation process before you start installing the vanity itself. This is important because a contractor will want to avoid scratching up the flooring with nails or screws, and he’ll also want to make sure the vanity is protected from any dust and cuts.
Vinyl plank flooring
If you’re going to install vinyl plank flooring under a vanity with legs, you’ll want to plan your installation carefully. You want to allow enough space under the flooring to allow for expansion. Leave approximately 1/4 to 1/2 inch of space between each plank. This way, the floor won’t shift when you set the vanity on top of it.
Another consideration is the direction of the flooring. If you have a vanity in your bathroom, for example, you may not want to install click-lock vinyl plank flooring beneath it. If you must, make sure to cut the planks to fit. Installing them too close to each other may cause the floors to buckle.
Floating floors are cheaper and easier to install. They’re also flexible and reliable. And they’re even suitable for non-professionals. However, you should take care when installing them because the core of the floor, made of fiberboard, is not repairable. If you damage it, you’ll have to replace it.
If you plan to install a vanity under a floating floor, you can opt for vinyl plank flooring. Since these are not permanently fixed to the floor, they can expand and contract with temperature changes. It’s safer to install these planks ON TOP of a subfloor.
Tiling around a vanity
Before installing ceramic tile around a vanity, it is important to consider the area in which the vanity will sit. While there isn’t a specific area to tile, it is important to make sure that the floor can handle the weight of the vanity. If possible, attach the vanity to the wall instead of tiling around it. This way, the expansion and contraction of the floor will not affect the vanity’s placement on the wall.
If you’re going to tile around the vanity, make sure you have a floor leveler in place before you begin. You will also want to be sure to thin-set the tile to ensure that the seal will hold. You should also use a caulk to avoid leaks and damages to the vanity.
It’s tempting to get expensive flooring in your bathroom, but laminated floors are a great alternative that is also budget-friendly. This type of flooring has a smooth surface that wipes clean easily. If you’re planning on installing this type of flooring in your bathroom, you need to keep in mind that you’ll have to clean it regularly.
To clean your laminate flooring, you can use a damp mop. However, you should be careful to not over-moisture it, as this may cause it to warp. A microfiber mop is ideal. Also, avoid using steam mops, as they can penetrate the surface of the laminate.
Choosing a bathroom vanity
When choosing a new bathroom vanity, there are a few things you should consider. First of all, you need to consider how much storage you need. Whether you need one sink or two, you will want to determine how much counter space is available. Then you will need to figure out the size of the new vanity.
The height of the vanity is another factor to consider. It should fit the height of the person who will be using it. Traditionally, this measurement is about 32 inches. However, modern sinks may be higher or lower. To ensure adequate countertop space, choose a vanity with a height of 34 to 35 inches. It is also helpful to choose a sink with a slightly off-center bowl, so you can enjoy more counter space